Autoencoder-based anomaly detection of industrial robot arm using stethoscope based internal sound sensor, Journal of Intelligent Manufacturing 34 (3), 1427-1444, 2023
Machine learning for object recognition in manufacturing applications, International Journal of Precision Engineering and Manufacturing 24 (4), 683-712, 2023
Fiber optic sensor for smart manufacturing, International Journal of Precision Engineering and Manufacturing-Smart …, 2023
Selective Surface Metallization of 3D-Printed Polymers by Cold-Spray-Assisted Electroless Deposition, ACS Applied Electronic Materials 5 (9), 5164-5175, 2023
Sound recognition based on convolutional neural network for real-time cutting state monitoring of tube cutting machine, International Journal of Precision Engineering and Manufacturing-Smart …, 2023
Measurement methods for quantifying powder flowability and velocity in cold spray systems, Advanced Powder Technology 34 (1), 103910, 2023
A cold spray-based novel manufacturing route for flexible electronics, Journal of Manufacturing Processes 86, 98-108, 2023
Machine Straightness Error Measurement Based on Optical Fiber Fabry–Pérot Interferometer Monitoring Technique, Journal of Manufacturing Science and Engineering 145 (1), 011007, 2023
Autonomous robotic bin picking platform generated from human demonstration and YOLOv5, Journal of Manufacturing Science and Engineering 145, 121006-1, 2023
Cold spray direct writing of flexible electrodes for enhanced performance triboelectric nanogenerators, Journal of Manufacturing Processes 100, 27-33, 2023
Cost-effective calibration of collaborative robot arm with single wire encoder, International Journal of Precision Engineering and Manufacturing 24 (9 …, 2023
An finite element analysis surrogate model with boundary oriented graph embedding approach for rapid design, Journal of Computational Design and Engineering 10 (3), 1026-1046, 2023
In Situ Spray Polymerization of Conductive Polymers for Personalized E-textiles, ACS nano 17 (22), 22733-22743, 2023
A study on converging-diverging nozzle design for supersonic spraying of liquid droplets toward nanocoating applications, Journal of Manufacturing Science and Engineering 145 (7), 071011, 2023
Detection and identification of particles on silicon wafers based on light scattering and absorption spectroscopy and Machine learning, Manufacturing Letters 35, 991-998, 2023
A solution procedure to improve 3D solid finite element analysis with an enrichment scheme, Applied Sciences 13 (12), 7114, 2023
Stroboscopic Data-Driven, Integrated, and Intelligent Machine Learning-Based Algorithms for Semiconductor Wafer Inspection, International Manufacturing Science and Engineering Conference 87240 …, 2023
Adhesion of rough cold sprayed metal coatings on polymers, Surface Engineering 39 (2), 161-173, 2023
Very high cycle fatigue on gas metal arc butt-welded AA6061-T6 plates, Journal of Mechanical Science and Technology 37 (12), 6649-6655, 2023
[스마트생산시스템 부문] Sound-based AI and Smart Manufacturing Technology, 한국정밀공학회 학술발표대회 논문집, 9-9, 2023
An Experiential learning Approach to Industrial loT Implementation of Smart manufacturing through Coursework and University-Industry Partnerships., Journal of Engineering Technology 40 (2), 2023
Preface for Robots for Manufacturing Processes and Systems, International Journal of Precision Engineering and Manufacturing 24 (9 …, 2023
System and methods for machine anomaly detection based on sound spectrogram images and neural networks, US Patent 11,688,415, 2023
Data Analytics Short Courses for Reskilling and Upskilling Indiana’s Manufacturing Workforce, 2023 ASEE Annual Conference & Exposition, 2023
Board 125: Taking an Experiential Learning Approach to Industrial IoT Implementation for Smart Manufacturing through Course Work and University-Industry Partnerships, 2023 ASEE Annual Conference & Exposition, 2023
Electronic textiles and methods for fabrication thereof, US Patent App. 17/823,021, 2023
Machining Sound Analysis for Fiber Bending Detection in CFRP Milling, 한국정밀공학회 학술발표대회 논문집, 809-809, 2023
ENGINEERING TECHNOLOGY, Journal of Engineering Technology, 7, 2023
Sound Monitoring and Applications for Smart Manufacturing Using MTConnect Framework and Artificial Intelligence, International Conference on Precision Engineering and Sustainable …, 2023
Real-time Machine State Monitoring using Sound and Machine Learning, The 9th International Conference on Manufacturing, Machine Design and …, 2023
2022
Topography‐supported nanoarchitectonics of hybrid scaffold for systematically modulated bone regeneration and remodeling, Advanced Functional Materials 32 (51), 2206863, 2022
Development of robotic bin picking platform with cluttered objects using human guidance and convolutional neural network (CNN), Journal of Manufacturing Systems 63, 539-549, 2022
Immersive and interactive cyber-physical system (I2CPS) and virtual reality interface for human involved robotic manufacturing, Journal of Manufacturing Systems 62, 234-248, 2022
A Programmable Dual‐Regime Spray for Large‐Scale and Custom‐Designed Electronic Textiles, Advanced Materials 34 (9), 2108021, 2022
Characterizing the mechanical performance of a bare-metal stent with an auxetic cell geometry, Applied Sciences 12 (2), 910, 2022
Cold spray-based rapid and scalable production of printed flexible electronics, Additive Manufacturing 60, 103244, 2022
Selective metallization on glass surface by laser direct writing combined with supersonic particle deposition, Manufacturing Letters 31, 64-68, 2022
Electrically conductive metallized polymers by cold spray and co-electroless deposition, ASME Open Journal of Engineering 1, 2022
Geometrical simulation model for milling of carbon fiber reinforced polymers (CFRP), International Journal of Precision Engineering and Manufacturing 23 (11 …, 2022
System and methods for machine anomaly detection based on sound spectrogram images and neural networks, US Patent 11,475,910, 2022
Enhanced performance of triboelectric nanogenerators and sensors via cold spray particle deposition, ACS Applied Materials & Interfaces 14 (41), 46410-46420, 2022
Machining sound analysis for the effects of fiber bending on cutting mechanisms during carbon fiber reinforced plastic composite milling, Composites Part B: Engineering 241, 110019, 2022
Continuous coaxial nozzle designs for improved powder focusing in direct laser metal deposition, Journal of Manufacturing Processes 83, 116-128, 2022
Effect of fiber bending induced matrix shear behavior on machined surface quality in carbon fiber reinforced plastic milling, Composite Structures 287, 115343, 2022
Dynamic failure of composite strips under reverse ballistic impact, International Journal of Mechanical Sciences 234, 107700, 2022
Calibration of industrial robots with spherical joint using single wire encoder, Manufacturing Letters 33, 46-50, 2022
Numerical studies on cold spray particle deposition using a rectangular nozzle, International Manufacturing Science and Engineering Conference 85802 …, 2022
Topography‐Supported Nanoarchitectonics of Hybrid Scaffold for Systematically Modulated Bone Regeneration and Remodeling (Adv. Funct. Mater. 51/2022)., Advanced Functional Materials 32 (51), 2022
CNN-based Human Recognition and Extended Kalman Filter-based Position Tracking Using 360o LiDAR, Journal of the Korean Society for Precision Engineering 39 (8), 575-582, 2022
Cold Spray Multilayer Metal Build-Up on a Polymeric Substrate, International Manufacturing Science and Engineering Conference 85802 …, 2022
A Study on the Effect of Nozzle Geometrical Parameters on Supersonic Cold Spraying of Droplets, International Manufacturing Science and Engineering Conference 85802 …, 2022
Development of Autonomous Robotic Bin Picking System Using Convolutional Neural Network (CNN) Initially Trained by Human Skills, International Manufacturing Science and Engineering Conference 85819 …, 2022
A Programmable Dual‐Regime Spray for Large‐Scale and Custom‐Designed Electronic Textiles (Adv. Mater. 9/2022), Advanced Materials 34 (9), 2270069, 2022
2021
Polarization effect on hole evolution and periodic microstructures in femtosecond laser drilling of thermal barrier coated superalloys, Applied Surface Science 537, 148001, 2021
Establishing a cold spray particle deposition window on polymer substrate, Journal of Thermal Spray Technology 30, 1069-1080, 2021
Thrust force-based tool wear estimation using discrete wavelet transformation and artificial neural network in CFRP drilling, International Journal of Precision Engineering and Manufacturing 22, 1527-1536, 2021
Identifying manufacturability and machining processes using deep 3D convolutional networks, Journal of Manufacturing Processes 64, 1336-1348, 2021
A study on droplets dispersion and deposition characteristics under supersonic spray flow for nanomaterial coating applications, Surface and Coatings Technology 426, 127788, 2021
The influence of Bi2O3 glass powder in the silver paste and the impact on silicon solar cell substrates, Materials & Design 200, 109453, 2021
Experimental investigation on dry routing of CFRP composite: temperature, forces, tool wear, and fine dust emission, Materials 14 (19), 5697, 2021
Improved dexel representation: A 3-d cnn geometry descriptor for manufacturing cad, IEEE Transactions on Industrial Informatics 18 (9), 5882-5892, 2021
High precision in-situ monitoring of electrochemical machining process using an optical fiber Fabry–Pérot interferometer sensor, Journal of Manufacturing Processes 68, 180-188, 2021
Fabrication of thermochromic membrane and its characteristics for fever detection, Materials 14 (13), 3460, 2021
Removal of recast layer in the laser drilled film cooling holes by a two-step inner streaming electrochemical technique, Journal of Micromechanics and Microengineering 31 (7), 075006, 2021
Milling performance of CFRP composite and atomised vegetable oil as a function of fiber orientation, Materials 14 (8), 2062, 2021
Transverse impact by RCCs on S-glass and Kevlar® FRC strips, Composites Part A: Applied Science and Manufacturing 146, 106425, 2021
Human expertise inspired smart sensing and manufacturing, 2021 International conference on electronics, communications and information …, 2021
Modeling of a sampled apodized fiber Bragg grating moisture sensor, Optical Fiber Technology 65, 102630, 2021
Multiple sound sensors and fusion in modern CNN-based machine state prediction, International manufacturing science and engineering conference 85062 …, 2021
Effect of Au-Coating on the Laser Spot Cutting on Spring Contact Probe (SCP) for Semi-Conductor Inspection, Materials 14 (12), 3300, 2021
An FEA surrogate model with Boundary Oriented Graph Embedding approach, arXiv preprint arXiv:2108.13509, 2021
Milling Performance of CFRP Composite and Atomised Vegetable Oil as a Function of Fiber Orientation. Materials 2021, 14, 2062, s Note: MDPI stays neutral with regard to jurisdictional claims in published …, 2021
Geometrical Simulation Model for Milling of Carbon Fiber Reinforced Polymer (CFRP) Composites
Manufacturing Letters
Experimental Investigation on Dry Routing of CFRP Composite: Temperature, Forces, Tool Wear, and Fine Dust Emission. Materials 2021, 14, 5697, s Note: MDPI stays neutral with regard to jurisdictional claims in published …, 2021
2020
Ultrafast laser applications in manufacturing processes: A state-of-the-art review, Journal of Manufacturing Science and Engineering 142 (3), 031005, 2020
Deep learning based approach for identifying conventional machining processes from CAD data, Procedia Manufacturing 48, 915-925, 2020
Hollow-core photonic crystal fiber Mach–Zehnder interferometer for gas sensing, Sensors 20 (10), 2807, 2020
Development of internal sound sensor using stethoscope and its applications for machine monitoring, Procedia Manufacturing 48, 1072-1078, 2020
Micro/meso-scale mechanical machining 2020: a two-decade state-of-the-field review, Journal of Manufacturing Science and Engineering 142 (11), 110809, 2020
Temperature insensitive fiber optical refractive index probe with large dynamic range at 1,550 nm, Sensors and Actuators A: Physical 312, 112102, 2020
STEP-NC feature-oriented high-efficient CNC machining simulation, The International Journal of Advanced Manufacturing Technology 106, 2363-2375, 2020
Detection and quantification of underground CO2 leakage into the soil using a fiber-optic sensor, Optical Fiber Technology 60, 102375, 2020
Dual regime spray deposition based laser direct writing of metal patterns on polymer substrates, Journal of Micro-and Nano-Manufacturing 8 (2), 024511, 2020
In-Situ Monitoring of Solidification Process of PVA Solution by Fiber Optic Sensor Technique, IEEE Sensors Journal 21 (5), 6170-6178, 2020
Fabrication of electrically conductive patterns on ABS polymer using low-pressure cold spray and electroless plating, International Manufacturing Science and Engineering Conference 84263 …, 2020
Fabrication of electrically conductive patterns on acrylonitrile-butadiene-styrene polymer using low-pressure cold spray and electroless plating, Journal of Micro-and Nano-Manufacturing 8 (4), 041014, 2020
Simulation and characterization of cold spray deposition of metal powders on polymer substrate electrically conductive application, International Manufacturing Science and Engineering Conference 84263 …, 2020
Fabrication of Optical Fiber Sensors Based on Femtosecond Laser Micro Machining, Journal of Micro-and Nano-Manufacturing 8 (4), 041010, 2020
Comparative analysis and monitoring of tool wear in carbon fiber reinforced plastics drilling, Journal of the Korean Society for Precision Engineering 37 (11), 813-818, 2020
Numerical Investigation of Various Coaxial Nozzle Designs for Direct Laser Deposition, International Manufacturing Science and Engineering Conference 84263 …, 2020
The influence of Bi2O3 glass powder in silver paste on the fabrication of ohmic contacts and its potential effectiveness in solar cells and integrated circuits on p-type …, arXiv preprint arXiv:2008.10067, 2020
2019
Predictive maintenance of machine tool systems using artificial intelligence techniques applied to machine condition data, Procedia Cirp 80, 506-511, 2019
Tapered fiber-optic Mach-Zehnder interferometer for ultra-high sensitivity measurement of refractive index, Sensors 19 (7), 1652, 2019
Facile fabrication of flexible glutamate biosensor using direct writing of platinum nanoparticle-based nanocomposite ink, Biosensors and Bioelectronics 131, 257-266, 2019
Acid-treated Fe-doped TiO2 as a high performance photocatalyst used for degradation of phenol under visible light irradiation, Journal of Environmental Sciences 83, 183-194, 2019
Monitoring of carbon dioxide using hollow-core photonic crystal fiber mach–zehnder interferometer, Sensors 19 (15), 3357, 2019
Wettability modification of cyclic olefin copolymer surface and microchannel using micromilling process, Journal of Manufacturing Processes 37, 168-176, 2019
From macro to micro, evolution of surface structures on cutting tools: a review, JMST Advances 1, 89-106, 2019
Experimental comparison of the effect of the structure on MZI fiber gas sensor performance, 2019 IEEE Pacific Rim Conference on Communications, Computers and Signal …, 2019
Corrigendum to Facile fabrication of flexible glutamate biosensor using direct writing of platinum nanoparticle-based nanocomposite ink, Biosensors & bioelectronics 141, 111429, 2019
Parametric study for coaxial direct laser deposition (DLD) nozzle designs for powder stream control, 한국생산제조학회 학술발표대회 논문집, 4-4, 2019
MicroMilling Operations, Modern Manufacturing Processes, 411-434, 2019
Micro-scale fiber cutting geometry predictions during milling of carbon fiber reinforced polymers (CFRP) composites, International Manufacturing Science and Engineering Conference 58752 …, 2019
Special Section on Recent Advancements in Micro-and Nano‐manufacturing From the WCMNM2018—Part 1, Journal of Micro-and Nano-Manufacturing 7 (1), 010301, 2019
2018
A review on optical fiber sensors for environmental monitoring, International journal of precision engineering and manufacturing-green …, 2018
Significant improvement in visible light photocatalytic activity of Fe doped TiO2 using an acid treatment process, Applied Surface Science 427, 791-799, 2018
Measurement of in-fiber refractive index change using a Mach–Zehnder interferometer, IEEE Photonics Technology Letters 31 (1), 74-77, 2018
Development of silver-based bactericidal composite nanofibers by airbrushing, Journal of Nanoscience and Nanotechnology 18 (4), 2951-2955, 2018
Fiber optic sensor for measurement of carbon dioxide, US Patent 9,891,166, 2018
Material interface detection based on secondary electron images for focused ion beam machining, Ultramicroscopy 184, 37-43, 2018
Performance of volcano-like laser textured cutting tools: an experimental and simulative investigation, Lubricants 6 (4), 98, 2018
Performance of cemented carbide cutting tools with volcano-like texture on rake face, International Manufacturing Science and Engineering Conference 51388 …, 2018
Flame-Assisted Spray Pyrolysis Using an Annular Flame Nozzle with Decoupled Velocity Control, Journal of Manufacturing and Materials Processing 2 (4), 75, 2018
Internal optical elements produced by irradiation-induced refractive index changes, US Patent 10,105,918, 2018
Antibacterial Activity of Smart (Auxetic) Polyurethane Foams, Nanotechnology-Driven Engineered Materials: New Insights, 241, 2018
Characterization of Long Period Grating With a Screw Shape Fabricated by a Single-Path Scanning of Femtosecond Laser, International Manufacturing Science and Engineering Conference 51388 …, 2018
An Automated Patternator System Development
2017
Design and fabrication of auxetic PCL nanofiber membranes for biomedical applications, Materials Science and Engineering: C 81, 334-340, 2017
Measurement methods for solubility and diffusivity of gases and supercritical fluids in polymers and its applications, Polymer reviews 57 (4), 695-747, 2017
Fabrication of a screw-shaped long-period fiber grating for refractive index sensing, IEEE Photonics Technology Letters 29 (24), 2242-2245, 2017
Mechanical characterization of auxetic stainless steel thin sheets with reentrant structure, Smart Materials and Structures 26 (8), 085022, 2017
Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite, Journal of Manufacturing Processes 30, 133-140, 2017
Chip volume and cutting force calculations in 5-axis CNC machining of free-form surfaces using flat-end mills, The International Journal of Advanced Manufacturing Technology 90, 1145-1154, 2017
Cryogenic machining of PDMS fluidic channel using shrinkage compensation and surface roughness control, International Journal of Precision Engineering and Manufacturing 18, 1711-1717, 2017
The effect of nozzle-exit-channel shape on resultant fiber diameter in melt-electrospinning, Materials Research Express 4 (1), 015302, 2017
The possibility of multi-layer nanofabrication via atomic force microscope-based pulse electrochemical nanopatterning, Nanotechnology 28 (19), 195302, 2017
Optimal tool orientation generation and chip volume/cutting force predictions for 5-axis CNC machining of curved surfaces using flat-end mills, Computer-Aided Design and Applications 14 (3), 331-342, 2017
Uniform silver nanoparticles coating using dual regime spray deposition system for superhydrophilic and antifogging applications, Journal of Coatings Technology and Research 14, 347-354, 2017
Numerical simulation of chip ploughing volume in micro ball-end mill machining, International Journal of Precision Engineering and Manufacturing 18, 915-922, 2017
Development and Evaluation of Flame-Assisted Dual Velocity Nanoparticle Coating System, Journal of Micro-and Nano-Manufacturing 5 (4), 044501, 2017
Performance Evaluation of Atomization-Based Uniform Spray Coating for 3D Scanning, Journal of the Korean Society for Precision Engineering 34 (10), 689-693, 2017
A New Gas/Supercritical Fluid (SCF) Diffusivity Measurement Method for CO2 Saturated Polymer Systems Using Optical Transmission Property, TechConnect World Innovation Conference and Expo Washington, DC, 2017
Uniform spray-based large area nanoparticle coating at nanometric thickness, Adv. Mater. TechConnect Briefs 1, 391-394, 2017
Smart Predictions and Decisions for Smart Manufacturing, 한국정밀공학회 학술발표대회 논문집, 7-7, 2017
Interferometric measurement of refractive index modification in a single mode microfiber, Ultrafast Phenomena and Nanophotonics XXI 10102, 191-196, 2017
2016
Biomaterial strategies for delivering stem cells as a treatment for spinal cord injury, Cells Tissues Organs 202 (1-2), 42-51, 2016
A cost-effective method to create physically and thermally stable and storable super-hydrophobic aluminum alloy surfaces, Surface and Coatings Technology 285, 227-234, 2016
Bragg grating embedded in Mach-Zehnder interferometer for refractive index and temperature sensing, IEEE Photonics Technology Letters 28 (18), 1968-1971, 2016
Miniaturized tapered photonic crystal fiber Mach–Zehnder interferometer for enhanced refractive index sensing, IEEE Sensors Journal 16 (24), 8761-8766, 2016
Fabricating and controlling PCL electrospun microfibers using filament feeding melt electrospinning technique, Journal of Micromechanics and Microengineering 27 (2), 025007, 2016
Design and application of nanoparticle coating system with decoupled spray generation and deposition control, Journal of Coatings Technology and Research 13, 769-779, 2016
Micro-scale hole profile measurement using rotating wire probe and acoustic emission contact detection, Measurement 89, 215-222, 2016
Manufacturing and characterization of encapsulated microfibers with different molecular weight poly (ε-caprolactone)(PCL) resins using a melt electrospinning technique, Materials Research Express 3 (2), 025301, 2016
Numerical simulation of chip ploughing volume and forces in 5-axis CNC micro-milling using flat-end mills, Procedia Manufacturing 5, 348-361, 2016
A comparative study of the antibacterial activity of rosemary extract blended with polymeric biomaterials, Journal of Bionanoscience 10 (4), 326-330, 2016
Numerical approach to modeling and characterization of refractive index changes for a long-period fiber grating fabricated by femtosecond laser, Materials 9 (11), 941, 2016
Micro flat end milling simulation model with instantaneous plowing area prediction, Journal of Micro-and Nano-Manufacturing 4 (2), 021004, 2016
3-axis milling algorithm development for carbon fiber reinforced polymer (CFRP) composites, Journal of the Korean Society for Precision Engineering 33 (6), 447-452, 2016
Nanoparticle Coating System Development for Surface Functionalization, 한국생산제조학회 학술발표대회 논문집, 7-7, 2016
Front & Back Matter, Cells Tissues Organs 202 (1-2), 2016
2015
Electrospun biomaterial scaffolds with varied topographies for neuronal differentiation of human‐induced pluripotent stem cells, Journal of biomedical materials research Part A 103 (8), 2591-2601, 2015
Design and fabrication of auxetic stretchable force sensor for hand rehabilitation, Smart Materials and Structures 24 (7), 075027, 2015
Fabrication and characterization of nonwoven auxetic polymer stent, Polymer-Plastics Technology and Engineering 54 (15), 1553-1559, 2015
Development of a glial cell-derived neurotrophic factor-releasing artificial dura for neural tissue engineering applications, Journal of Materials Chemistry B 3 (40), 7974-7985, 2015
Characterization of refractive index change and fabrication of long period gratings in pure silica fiber by femtosecond laser radiation, Optics & Laser Technology 74, 119-124, 2015
Combining melt electrospinning and particulate leaching for fabrication of porous microfibers, Manufacturing Letters 3, 5-8, 2015
Development of bioactive packaging structure using melt electrospinning, Journal of Polymers and the Environment 23, 416-423, 2015
Effects of molecular weight and temperature on fiber diameter of poly (ε-caprolactone) melt electrospun fiber, J. Korean Soc. Manuf. Technol. Eng 24 (2), 160-165, 2015
Mathematical model for predicting topographical properties of poly (ε-caprolactone) melt electrospun scaffolds including the effects of temperature and linear transitional speed, Journal of Micromechanics and Microengineering 25 (4), 045018, 2015
Microfiber Bragg grating sandwiched between standard optical fibers for enhanced temperature sensing, IEEE Photonics Technology Letters 28 (6), 685-688, 2015
Improvement of optical 3D scanner performance using atomization-based spray coating, 한국생산제조학회지 24 (1), 23-30, 2015
Ductile mode electrochemical oxidation assisted micromachining for glassy carbon, Journal of Micromechanics and Microengineering 25 (4), 045021, 2015
Formation mechanism of self-organized nano-ripples on quartz surface using femtosecond laser pulses, Optik 126 (24), 5979-5983, 2015
Tapered photonic crystal fiber based Mach-Zehnder interferometer for enhanced refractive index sensing, 2015 IEEE SENSORS, 1-4, 2015
Probing system for measurement of micro-scale objects, US Patent 9,021,881, 2015
Dimensional measurement based on rotating wire probe and acoustic emission, Measurement 59, 329-336, 2015
Improvement of computer-aided manufacturing (CAM) software for laser machining, 한국생산제조학회지 24 (4), 374-385, 2015
IEEE Sensors
Effects of coating material on the fabrication accuracy of focused ion beam machining of insulators, Japanese journal of applied physics 54 (9), 096602, 2015
Swelling behavior of hydrogels within Auxetic polytetrafluoroethylene jacket, Polymer-Plastics Technology and Engineering 54 (17), 1787-1793, 2015
Bragg grating fabrication in microfiber by femtosecond pulse filamentation induced periodic refractive index modification, Laser Applications in Microelectronic and Optoelectronic Manufacturing …, 2015
2D Simulation of 3-Axis Milling for Carbon Fiber Reinforced Polymer (CFRP) Composites, 한국정밀공학회 학술발표대회 논문집, 41-42, 2015
Bowtie-shaped hole array for fiber-optic refractive index sensing in telecom-wavelengths, Conference on Lasers and Electro-Optics/Pacific Rim, 26P_62, 2015
Special issue on environmentally conscious technologies in mechanical engineering, Advances in Mechanical Engineering 7 (5), 1687814015585425, 2015
2014
One-step fabrication of superhydrophobic hierarchical structures by femtosecond laser ablation, Applied Surface Science 313, 411-417, 2014
Fabrication of poly (ϵ-caprolactone) microfiber scaffolds with varying topography and mechanical properties for stem cell-based tissue engineering applications, Journal of Biomaterials Science, Polymer Edition 25 (1), 1-17, 2014
Use of vegetable oil in water emulsion achieved through ultrasonic atomization as cutting fluids in micro-milling, Journal of Manufacturing Processes 16 (3), 405-413, 2014
Design and fabrication of stent with negative Poisson’s ratio, International Journal of Mechanical and Mechatronics Engineering 8 (2), 448-454, 2014
Near-field modification of femtosecond laser beam to enhance single-shot pulse filamentation in glass medium, Applied Physics A 114, 1161-1165, 2014
Using mathematical modeling to control topographical properties of poly (ε-caprolactone) melt electrospun scaffolds, Journal of Micromechanics and Microengineering 24 (6), 065009, 2014
Characterization and auxetic effect of polytetrafluoroethylene tubular structure, Int. J. Adv. Sci. Eng 1, 8-13, 2014
Multifunctional electrospun scaffolds for promoting neuronal differentiation of induced pluripotent stem cells, Journal of Biomaterials and Tissue Engineering 4 (11), 906-914, 2014
Feasibility of lignin as additive in metalworking fluids for micro-milling, Journal of Manufacturing Processes 16 (4), 503-510, 2014
Filament-based fabrication and performance analysis of fiber Bragg grating sensors using ultrashort pulse laser, Journal of Micro-and Nano-Manufacturing 2 (2), 021007, 2014
THz field enhancement by antenna coupling to a tapered thick slot waveguide, Journal of Lightwave Technology 32 (20), 3676-3682, 2014
Fiber refractometer to detect and distinguish carbon dioxide and methane leakage in the deep ocean, International Journal of Greenhouse Gas Control 31, 41-47, 2014
Atomization-based spray coating for improved 3D scanning
Atomized water and oil sprays as a single jet for cutting fluid delivery in micro-milling, 9th International Workshop on Microfactories, 127-131, 2014
Mach-Zehnder interferometer using small diameter single mode fiber for refractive index sensing, Asia Communications and Photonics Conference, AW3I. 5, 2014
Influence of negative Poisson’s ratio on stent applications, Adv. Mater 2 (3), 42-47, 2013
Characterization and micromilling of flow induced aligned carbon nanotube nanocomposites, Journal of Micro and Nano-Manufacturing 1 (1), 011009, 2013
Micromechanical machining of soda lime glass, The International Journal of Advanced Manufacturing Technology 67, 1139-1150, 2013
Mixed jet of independently atomized water and oil sprays as cutting fluids in micro-milling, Manufacturing Letters 1 (1), 13-16, 2013
Femtosecond laser based in-fiber long period grating fabrication for improved solution sensing, Laser Applications in Microelectronic and Optoelectronic Manufacturing …, 2013
2-Dimensional ploughing simulation model development in micro flat end milling, International Conference on Micromanufacturing, 2013
Nanofabrication of electrospun fibers for controlled release of retinoic acid, Proceedings of the 8th international conference on micromanufacturing, 2013
Characterization of femtosecond laser filament-fringes in titanium, Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial …, 2013
Elastin-sprayed tubular scaffolds with microstructures and nanotextures for vascular tissue engineering, Summer Bioengineering Conference 55607, V01AT22A003, 2013
Parametric Studies of Melt Electrospinning Poly ε (caprolactone) Fibers for Tissue Engineering Applications, Proc. 8th Int. Conf. MicroManufacturing, 526-531, 2013
Parametric Studies of Melt Electrospinning Poly?(caprolactone) Fibers for Tissue Engineering Applications, 8th International Conference on MicroManufacturing (ICOMM 2013), 2013
Computer-aided manufacturing (CAM) software development for laser machining, ASME International Mechanical Engineering Congress and Exposition 56185 …, 2013
2012
Modeling of minimum uncut chip thickness in micro machining of aluminum, Journal of Materials Processing Technology 212 (3), 553-559, 2012
A new mechanistic approach for micro end milling force modeling
Probing system for measurement of micro-scale components, Journal of manufacturing processes 14 (2), 174-180, 2012
Towards high throughput tissue engineering: development of chitosan-calcium phosphate scaffolds for engineering bone tissue from embryonic stem cells, American journal of stem cells 1 (1), 81, 2012
Feasibility of vegetable oil in water emulsion achieved through ultrasonic atomization as cutting fluids, 40th North American Manufacturing Research Conference, 251-258, 2012
A New Mechanistic Approach for Micro End Milling Force Modelling, ASME J. Manuf. Sci. Eng. 134 (1), 011006, 2012
Distributed All-Optical Sensor to Detect dCO2 in Aqueous Environments, AGU Fall Meeting Abstracts 2012, H11I-1288, 2012
Long period grating inscribed by femtosecond laser for refractive index measurements in aqueous environments, OFS2012 22nd International Conference on Optical Fiber Sensors 8421, 972-975, 2012
Design and Fabrication of a Three Dimensional Commemorative Artistic Plaque, Journal of Mechanics Engineering and Automation 1 (4), 293-297, 2012
Development and application of in-fibre Bragg grating contact force sensors for application to the human hip, 대한기계학회 춘추학술대회, 76-76, 2012
Fuzzy PWM-PID control of cocontracting antagonistic shape memory alloy muscle pairs in an artificial finger, Mechatronics 21 (7), 1190-1202, 2011
Experimental analysis of an acoustic emission-based tool tip touch-off detection for micro end milling, Journal of Manufacturing Technology Research 3 (3/4), 167, 2011
2010
Atomic force microscope probe-based nanometric scribing, Journal of Micromechanics and Microengineering 20 (11), 115016, 2010
Understanding the effects of the system parameters of an ultrasonic cutting fluid application system for micro-machining, Journal of Manufacturing Processes 12 (2), 92-98, 2010
Modeling of the thread milling operation in a combined thread/drilling operation: Thrilling
Design and development of cutting fluid system based on ultrasonic atomization for micro-machining, Trans. NAMRI/SME 38 (1), 97-104, 2010
A new mechanistic approach for micro end milling force modeling, ASME International Mechanical Engineering Congress and Exposition 44274, 925-933, 2010
2009
Modeling of dynamic micro-milling cutting forces, International Journal of Machine Tools and Manufacture 49 (7-8), 586-598, 2009
Tool wear monitoring of micro-milling operations, Journal of Materials Processing Technology 209 (10), 4903-4914, 2009
Investigation of micro scratching and machining of glass, International Manufacturing Science and Engineering Conference 43628, 401-408, 2009
Mechanistic force modeling of micro ball end milling processes, Society of Manufacturing Engineers, Paper No. TP09PUB029, 2009
2008
An experimental evaluation of an atomization-based cutting fluid application system for micromachining
An acoustic emission-based method for determining contact between a tool and workpiece at the microscale
A submicron multiaxis positioning stage for micro-and nanoscale manufacturing processes
Experimental investigation of machinability and tool wear in micro-endmilling, Transactions of the North American Manufacturing Research Institution of SME …, 2008
Modeling and analysis of the thread milling operation in the combined drilling/thread milling process, International Manufacturing Science and Engineering Conference 48517, 377-386, 2008
Effects of process parameters on surface location errors in micro-endmilling, Transactions of the North American Manufacturing Research Institution of SME …, 2008
2007
Estimation of effective error parameters in high-speed micro-endmilling, International Journal of Machine Tools and Manufacture 47 (9), 1449-1454, 2007
Experimental Investigation of a Combined Drilling and Thread Milling Process: Thrilling, Thirty-Fifth North American Manufacturing Research Conference-NAMRC 35, 2007
Effect of tool-tip vibration and stability on acoustic emission generation in micro-endmilling, 15th International Symposium on Electromachining, ISEM 2007, 625-630, 2007
2006
Investigation of the dynamics of microend milling—part I: model development
Investigation of the dynamics of microend milling—part II: model validation and interpretation
A model for thread milling cutting forces, International Journal of Machine Tools and Manufacture 46 (15), 2057-2065, 2006
The effects of process faults and misalignments on the cutting force system and hole quality in reaming, International Journal of Machine Tools and Manufacture 46 (12-13), 1281-1290, 2006
An acoustic emission-based method for determining relative orientation between a tool and workpiece at the micro-scale, International Manufacturing Science and Engineering Conference 47624, 1033-1042, 2006
2005
Modeling and analysis of micro-end milling dynamics, University of Illinois at Urbana-Champaign, 2005
2004
Cutting mechanisms and their influence on dynamic forces, vibrations and stability in micro-endmilling, ASME International Mechanical Engineering Congress and Exposition 47136, 583-592, 2004
The effects of end mill alignment errors on vibrations at high spindle speeds, Transactions of the North American Manufacturing Research Institute of SME …, 2004
2002
Evaluation of a spindle-based force sensor for monitoring and fault diagnosis of machining operations, International Journal of Machine Tools and Manufacture 42 (6), 741-751, 2002
2001
A fast tool servo design for precision turning of shafts on conventional CNC lathes, International Journal of Machine Tools and Manufacture 41 (7), 953-965, 2001
2000
Precision turning of shafts with piezoelectric actuator tool, University of British Columbia, 2000
An FEA surrogate model with boundary oriented graph embedding approach for rapid design, Journal of Computational Design and Engineering, 0
Multifunctional Cold Spray Hybrid Coatings on Flexible Polymers for Improved Surface Properties, Martin Byung-Guk, Multifunctional Cold Spray Hybrid Coatings on Flexible …, 0
Identifying Machinability and Machining Processes using Deep 3D Convolutional Networks
An Integrated Method for Selective Metallization on Glass Surface: Laser Direct Writing Coupled with Supersonic Spray Coating
International Journal of Mechanical, Industrial and Aerospace Sciences
Miniaturized Tapered Photonic Crystal Fiber Mach-Zehnder Interferometer for Enhanced Refractive Index Sensing Index Sensing
Machinability of Aligned CNT Nanocomposites ICOMM, composites 12, 14, 0
International Workshop on SMART MATERIALS, STRUCTURES & SHM NDT in Canada 2013 Conference & NDT for the Energy Industry